Building Automation & Access Control

Displays for Building Automation and Access Control

Direct answer

A building automation or access-control panel is a display that stays on for years, is touched dozens of times a day and rarely gets a cable replaced. Stark Touch Device supplies touch monitors and panel PCs for intercom stations, door-entry panels, room controllers and lift or lobby information points, specified by mounting depth, touch type and interface.

What the installation demands

Sealing — IP65 (sealed front panel); IP66 / IP69K available where washdown or coolant is present.
Temperature — 0~50 °C standard; wide temperature -20~70 °C available; storage -20~60 °C; humidity 10~90% RH non-condensing.
Readability — 300 / 400 / 500 nits standard series; customized brightness up to 1500 cd/m².
Touch — projected capacitive (PCAP) 10-point multi-touch.
Optical bonding — available; reduces internal reflection and improves contrast.
Mounting — VESA 75/100, panel mount and open frame.
Supply — MOQ 1 pc for sample evaluation; lead time 7-15 days for standard configurations; warranty 12 months from shipment.

Industry-specific requirements

Flush or surface mounting into a wall box — panel mount and open frame versions exist for shallow enclosures.
Continuous duty: the panel is expected to run unattended, so heat and backlight life are part of the specification.
Glove or dry-finger touch on a public panel, with PCAP 10-point multi-touch.
Where the panel sits outdoors or in a lobby with direct sun, brightness up to 1500 cd/m² is available.

Recommended configurations

Wall and lobby information panels: wall mounted display.
Door-entry and intercom stations: industrial touch screen monitors.
Room control with computing inside: touch screen PCs.
Embedded fit into an existing panel design: embedded displays.

Certifications and compliance

RoHS / REACH compliant materials; certifications and test reports can be provided per order or per project.

Installation and integration

We quote against the wall box or panel drawing: cut-out, mounting depth and connector position. Panel-mount and open-frame versions let the display become part of the fixture instead of a separate box.

Where this is used

Residential and commercial building automation, access control, intercom, lift control, lobby information and facility management panels.

FAQ

Will it fit a standard wall box? Send the box or cut-out drawing; panel mount and open frame cover most depths.

Can it be used with gloves? PCAP touch is specified with the cover lens; tell us the glove material.

Does it need a fan? Fanless panel PCs are available where dust or noise matters.

What is the order quantity and lead time? 1 pc sample evaluation; 7-15 days for standard configurations.

All industry solutions