Healthcare & Medical Equipment

Displays for Healthcare and Medical Equipment

Direct answer

A display inside medical or healthcare equipment is part of the device, not an accessory: it has to pass the equipment maker’s own electrical, cleaning and lifetime requirements. Stark Touch Device supplies the display and panel PC for the equipment builder, who remains responsible for the final device approval.

What the installation demands

Sealing — IP65 (sealed front panel); IP66 / IP69K available where washdown or coolant is present.
Temperature — 0~50 °C standard; wide temperature -20~70 °C available; storage -20~60 °C; humidity 10~90% RH non-condensing.
Readability — 300 / 400 / 500 nits standard series; customized brightness up to 1500 cd/m².
Touch — projected capacitive (PCAP) 10-point multi-touch.
Optical bonding — available; reduces internal reflection and improves contrast.
Mounting — VESA 75/100, panel mount and open frame.
Supply — MOQ 1 pc for sample evaluation; lead time 7-15 days for standard configurations; warranty 12 months from shipment.

Industry-specific requirements

Front surface that withstands the equipment maker’s cleaning procedure — agreed per project.
EMC and safety requirements belong to the finished device; tell us the standard the device must meet.
Panel fit into the device housing: panel mount or open frame, VESA 75/100 where a bracket is used.
Readability in a clinical room: 300 to 500 nits standard, higher where needed.

Recommended configurations

Device front panel: industrial touch screen monitors.
Device with computing inside: touch screen PCs or fanless industrial PCs.
Embedded fit inside an existing enclosure: embedded displays.
Mobile or bedside use: rugged portable PCs.

Certifications and compliance

RoHS / REACH compliant materials; certifications and test reports can be provided per order or per project.

Installation and integration

We quote against the device drawing (cut-out, depth, connector). The equipment maker keeps control of the final device-level certification; we supply the display documentation needed for that submission.

Where this is used

Diagnostic and treatment equipment, patient monitoring consoles, laboratory instruments, dental and veterinary devices, hospital information terminals.

FAQ

Do you supply medical-certified displays? Certification belongs to the finished device; we supply the display and the documentation needed for the equipment maker’s submission.

Can the front be cleaned with the usual agents? Tell us the cleaning procedure and we agree the cover lens and sealing.

What is the order quantity and lead time? 1 pc sample evaluation; 7-15 days for standard configurations.

All industry solutions