The A26 Android series is an IP65 optical bonding panel PC built on the Rockchip RK3399 with 4 GB RAM and 64 GB eMMC, available in two sizes: a 15.6-inch aluminium brushed version at 800 nits, and a 21.5-inch stainless steel version at 250 nits. Optical bonding removes the air gap between touch glass and panel, so the display cannot fog internally — the main failure mode of sealed metal housings in cold, humid or wash-down environments.
| Preview | Model | Size | Brightness | Housing | Datasheet |
|---|---|---|---|---|---|
15.6" | STD-OB156EBPC | 15.6" | 800 cd/m² | aluminium brushed | Download PDF |
21.5" | STD-OB215EBPC | 21.5" | 250 cd/m² | stainless steel | Download PDF |
Both sizes share the same RK3399 platform, 4 GB DDR3 / 64 GB eMMC and 10-point PCAP touch. The 15.6" is aluminium for machine HMI; the 21.5" is stainless steel for food, chemical and medical wash-down.
A sealed metal housing is a humidity trap. A laminated screen inside it will fog on the first cold morning, and it reflects ambient light twice, halving effective contrast. Optical bonding replaces the air gap with optical-grade adhesive: no internal fogging, higher contrast, and a touch surface that reads as part of the panel rather than a sheet floating above it.
| Customizable | Fixed |
|---|---|
| Memory / storage configuration | RK3399 platform |
| Cover coating: AR / AF / AG | 1920×1080 resolution |
| Interface layout and connectors | 10-point PCAP touch |
| Housing finish (aluminium / stainless) and silkscreen | IP65 sealing |
It depends on viewing distance and housing material, not just size. The 15.6-inch is aluminium at 800 nits — better for machine fronts and bright factory floors. The 21.5-inch is stainless steel at 250 nits — better for food, chemical or medical areas that get washed down and where the operator stands further back.
The RK3399 platform supports Android builds in the 7.1–11 range depending on configuration. State your target version when ordering so we ship the matching image.
Yes, it is a standard Android device — install locally over USB or push through your own MDM.
Bonded on both sizes. The 10-point PCAP sensor is optically bonded to the panel with no air gap.
Because it is aimed at indoor wash-down environments rather than direct sunlight. Higher brightness is available as a customization if your application needs it.
1 pc for sample evaluation; 7–15 days for standard configurations, about 25 days for customized units.