The T28 AG touch series is an ultra-thin Android 11 advertising display with a 10-point capacitive touch layer bonded behind AG tempered glass. Four sizes run from 32 to 65 inch in a 28 mm body with a 10.9 mm bezel that is equal on all four sides. It is built for shop windows, showrooms and reception walls where customers walk up and touch the screen rather than read it from across the room.
| Model | Size | Resolution | Brightness | Thickness | Net / Gross | Datasheet |
|---|---|---|---|---|---|---|
| STD-3228 | 32" | 1920x1080 | 500 nits | 28 mm | 8.8 / 12.4 kg | |
| STD-4328 | 43" | 1920x1080 | 500 nits | 28 mm | 15.6 / 20.7 kg | |
| STD-5528 | 55" | 3840x2160 | 450 nits | 28 mm | 26.9 / 31.7 kg | |
| STD-6528 | 65" | 3840x2160 | 430 nits | 28 mm | 36.4 / 42.6 kg |
All four sizes share the same body depth, bezel width, touch stack and Android platform. Only the panel size, resolution and weight change.
| Item | Specification |
|---|---|
| Touch technology | Projected capacitive (PCAP) |
| Touch points | Up to 10 points |
| Input | Finger or capacitive stylus |
| Touch life | >80 million touches |
| Response time | 8 ms |
| Touch deviation | <2 mm |
| Cover glass | Fully tempered, AG (anti-glare) matte |
| Hardness | Mohs 7 |
| Light transmittance | >95% |
| Item | Specification |
|---|---|
| Panel | IPS, normally black |
| Contrast | 1200 : 1 |
| Colour gamut | 90% |
| Viewing angle | 178 / 178 / 178 / 178 |
| OS | Android 11, built-in CMS with remote publishing |
| CPU | RK3566 / T982 |
| RAM / Storage | 2G / 4G / 8G | 16GB / 32GB / 64GB |
| Wireless | 2.4G WiFi, Bluetooth 4.0 |
| Interface (32") | HDMI out x1 (in x1 on T982 board), USB x2, TF card x1, RJ45, 3.5 mm audio |
| Speaker | 4 Ω 2 W |
| Power | AC 100-240 V 50/60 Hz, ≤70 W (32") |
| Operating | 0 to 50 °C, humidity ≤80% RH, storage -10 to 60 °C |
| Certification | 3C / CE / FCC / RoHS |
An advertising display that people actually touch is judged differently from one they only look at. The surface takes fingerprints, cleaning cloths, rings and occasionally a shoulder bag. A bare LCD face will scratch, and a glossy cover glass will turn every ceiling light into a bright reflection sitting on top of the picture.
This series puts a 3 mm fully tempered glass sheet at Mohs 7 over the touch sensor, with an AG matte finish that scatters reflected light instead of mirroring it. Light transmission stays above 95%, so the anti-glare treatment does not cost you brightness. The touch layer is a projected-capacitive stack rated for 8 ms response and under 2 mm deviation — the same class of sensor used in industrial panel PCs, not the cheap infrared frames that lose accuracy near the edges.
Behind the glass, the 28 mm aluminium body carries the panel and keeps the whole unit at 8.8 kg on the 32 inch, so a single installer can hang it on a standard bracket. The 10.9 mm bezel is equal on all four sides, which lets the screen sit in a portrait or landscape orientation without the frame looking wrong.
| Customizable | Fixed |
|---|---|
| RAM 2/4/8 GB, storage 16/32/64 GB | Panel size 32 / 43 / 55 / 65 inch |
| Main board RK3566 or T982 (adds HDMI in) | 28 mm body, 10.9 mm equal bezel |
| Housing colour and brand silkscreen | 10-point PCAP touch, AG glass Mohs 7 |
| Mounting: wall bracket, ceiling, mobile stand with gravity sensor | 16:9 aspect ratio |
| CMS branding and remote management account | Android 11 platform |
No. This series uses a standard air-gap assembly between the AG cover glass and the LCD module. Optical bonding is a separate process we offer on the bonded product range; it removes the internal air gap and is specified when the screen faces strong light or condensation.
The body, panel, bezel and Android platform are identical. This series adds a 10-point PCAP sensor and a fully tempered AG glass face at Mohs 7 with >95% transmittance, which makes the unit slightly heavier and adds touch drivers. If nobody will touch the screen, the non-touch T28 series is the cheaper specification.
The aluminium body is 28 mm. The overall depth including the front glass and frame comes to about 30 mm — both numbers are on the certified drawing, and both are on the datasheet for that size.
Yes. The 10.9 mm bezel is equal on all four sides, so portrait mounting looks the same as landscape. The Android build rotates the UI automatically, and the mounting bracket supports both orientations.
Android 11 with a built-in CMS for remote publishing and scheduling. You can also install your own APK and run it full-screen if you already have a player or kiosk app.
One unit for sample evaluation. Standard configurations typically ship in 7-15 days; custom housing, branding or storage configurations take about 25 days. Tell us the size, RAM/storage and quantity when you enquire.
If you do not need touch, the T28 non-touch series uses the same 28 mm body without the touch stack. For the thinnest body and the widest size range — 18.5 to 75 inch at 23 mm — see the T23 series. If the screen hangs where walls need to carry weight, the T26 series uses a 26.5 mm body and a 10.9 mm bezel. For a screen that should read as framed artwork, see the MK framed series; for double-sided ceiling-hung units, the SM series. If the installation is outdoors or behind glass in direct sun, start from the outdoor signage range instead.