The T26 series is an ultra-thin Android 11 advertising display with a 26.5 mm body and a 10.9 mm bezel that is equal on all four sides. Six sizes run from 21.5 to 65 inch, with 4K on 55 and 65 inch. It sits between the 23 mm T23 and the 28 mm T28 in depth, and the extra 3.5 mm buys a stiffer extrusion — the version to pick when a large screen hangs from a wall that is not perfectly flat.
| Model | Size | Resolution | Brightness | Thickness | Net / Gross | Datasheet |
|---|---|---|---|---|---|---|
| STD-21.5T26 | 21.5" | 1920x1080 | ≥500 nits | 26.5 mm | 4.85 / 5.9 kg | |
| STD-27T26 | 27" | 1920x1080 | ≥500 nits | 26.5 mm | 6.5 / 9 kg | |
| STD-32T26 | 32" | 1920x1080 | ≥500 nits | 26.5 mm | 8.5 / 11.3 kg | |
| STD-43T26 | 43" | 1920x1080 | ≥500 nits | 26.5 mm | 14.7 / 18.6 kg | |
| STD-55T26 | 55" | 3840x2160 | 450-500 nits | 26.5 mm | 25.1 / 30.1 kg | |
| STD-65T26 | 65" | 3840x2160 | 400-450 nits | 26.5 mm | 34.2 / 41.75 kg |
All six sizes share the 26.5 mm body, 10.9 mm equal bezel, AG 3 mm glass and Android 11 platform. Only panel size, resolution and weight change.
| Item | Specification |
|---|---|
| Panel | IPS, normally black |
| Contrast | 1200 : 1 |
| Colour gamut | ≥90% NTSC |
| Viewing angle | 178 / 178 / 178 / 178 |
| Cover glass | AG matte 3 mm, hardness 7H |
| Transmittance / Haze | 93% / 10% |
| Body | 26.5 mm |
| Bezel | 10.9 mm, equal on four sides |
| Wall gap | 2 mm |
| OS | Android 11, built-in CMS, remote publishing and synchronised playback |
| CPU | RK3566 (21.5/27/32"); 43" available with RK3566, RK3288, T972 or T982 |
| RAM / Storage | 2G / 4G / 8G | 16GB / 32GB / 64GB |
| Wireless | 2.4G WiFi, Bluetooth 4.0, 10/100M Ethernet |
| Interface | HDMI out x1, USB x2, TF card x1, RJ45, 3.5 mm audio |
| Speaker | 4 Ω 2 W |
| Power | AC 100-240 V 50/60 Hz, ≤25 W (21.5") |
| Operating | 0 to 50 °C, humidity ≤80% RH, storage -10 to 60 °C |
| Installation | Wall / hanging bracket / mobile stand; landscape or portrait; recessed optional |
| Certification | CE / FCC |
The T26 body is 26.5 mm against 23 mm on the T23, and 3.5 mm sounds like nothing on a datasheet. It is the difference between an extrusion that flexes under a 65 inch panel and one that does not. On a long wall that is not perfectly flat — drywall on studs, a plasterboard partition, a rendered brick face — a stiffer chassis holds the screen plane straight instead of letting it bow toward the viewer at the centre.
That is why this series carries a 10.9 mm bezel rather than 10.5 mm: the frame section is deeper, the mounting points sit further inboard, and the wall bracket transfers load across a wider area. For 43 inch and up hanging on a stud wall, this is the series to specify. Below 32 inch the difference is academic and the T23 is the better buy.
The AG glass is the same specification used across the range: 3 mm, fully tempered, Mohs 7, 93% transmission and 10% haze. It handles corridor downlights and window reflections without turning the image grey, and it wipes clean without hazing.
| Customizable | Fixed |
|---|---|
| RAM 2/4/8 GB, storage 16/32/64 GB | Panel size 21.5 / 27 / 32 / 43 / 55 / 65 inch |
| Main board on 43": RK3566 / RK3288 / T972 / T982 | 26.5 mm body, 10.9 mm equal bezel |
| Housing colour and brand silkscreen | AG 3 mm glass, hardness 7H |
| Mounting: wall bracket, hanging bracket, mobile stand, recessed frame | 16:9 aspect ratio |
| CMS branding and remote management account | Android 11 platform |
3.5 mm of body depth and a frame section that is stiffer. The T23 goes up to 75 inch and is the thinner, lighter option; the T26 stops at 65 inch but holds a large panel flatter on an uneven wall. Both use the same AG 3 mm glass and Android 11 platform.
26.5 mm is the body. The overall depth including front glass and frame is on the certified drawing for each size, and both figures appear on that size's datasheet.
Yes, with the hanging bracket option. The deeper frame and inboard mounting points are what make this series suitable for ceiling drops as well as wall mounting.
55 and 65 inch run 3840x2160. The 21.5, 27, 32 and 43 inch models are 1920x1080.
Not in this series. If the screen has to be touched, the T28 AG touch series adds a 10-point PCAP layer behind fully tempered glass.
One unit for sample evaluation. Standard configurations typically ship in 7-15 days; custom housing or branding takes about 25 days. Tell us the size, RAM/storage and mounting method when you enquire.
For the thinnest body and the widest size range, see the 23 mm T23 series, which runs 18.5 to 75 inch. The T28 advertising display uses a 28 mm body at 10.5 mm bezel. If you need touch, start from the T28 AG touch series. For a screen that reads as framed artwork, see the MK framed series; for double-sided ceiling-hung units, the SM series. If the installation faces daylight or weather, start from the outdoor signage range instead.